Features of automatic aluminium bar cutting machine:

1、可根据材料大小实现单支或多支同时锯切,有效提高产能高达3倍以上

1. Simultaneous sawing of one or more branches can be realized according to the size of the material, and the productivity can be effectively increased by more than three times.

2、工件切割精度稳定控制在±0.1mm以内,主轴精度在0.01mm以内

2. The cutting accuracy of the workpiece is controlled within (+0.1mm) and that of the spindle is within 0.01mm.

3、采用步进横向进刀,更加稳定,配合超薄锯片,每天可节约成本达上千元

3. The cost can be saved up to 1000 yuan per day by adopting step-by-step transverse feed knife, which is more stable and matched with ultra-thin saw blade.

4、配上微量润滑装置和铝合金专用切削油可提高锯片使用寿命达30%以上

4. The service life of saw blade can be increased by more than 30% with Micro-lubrication device and special cutting oil for aluminium alloy.

5、送料及进刀全部采用进口方形直线导轨和丝杆,确保锯切加工的稳定性

5. All feeding and feeding tools adopt imported square linear guide rail and screw rod to ensure the stability of sawing process.

6、采用自主研发的升降式气浮送料装置,确保加工件的精度及防止材料表面刮伤

6. Adopt self-developed lifting air-flotation feeding device to ensure the accuracy of the workpiece and prevent scratches on the surface of the material.

7、采用双向吸尘并配合全封闭式保护罩,更好的收集铝屑,便于7S管理

7. Adopt two-way vacuum cleaner and fully enclosed protective cover to better collect aluminium chips and facilitate 7S management.

常规的切割机是采用上下锯切,而且他们所用的锯片一般都是比??较厚的,因为他们所用的锯片外径比较大.他们送料装置的切割精度都不是特别高.如果你要想要一台切割效率快、精度比较高的话,可能要买一台进口设备.但是我们邓氏精密机械的铝材切割设备也完全可以满足,有着和进口设备同样的效率和精度.

Conventional cutting machines use up-and-down sawing, and the blades they use are generally thicker than?? because they use a larger outer diameter of the saw blade. The cutting accuracy of their feeding device is not particularly high. If you want a fast cutting efficiency and high accuracy, you may need to buy an imported equipment. But we can also use the aluminum cutting equipment of Deng's precision machinery. To meet the requirements, it has the same efficiency and precision as imported equipment.

http://www.luqinjixie.com/