全自动切断机

当前位置: 首页>>新闻中心>>行业动态 >

新闻动态

联系我们

济南陆勤机械有限公司

联系人:张经理

电 话: 0531-83831136

电 话:18654536782

地址:山东省济南市章丘相公庄工业园

2020圆钢切断机在选择的那时候常见问题

浏览量:1913  来源:www.luqinjixie.com  作者:陆勤
数控圆钢切断机现阶段,销售市场上的自动式圆钢切断机商品有许多,因为中国生产制造自动式圆钢切断机的生产厂家有许多,绝大多数客户在选购时常有疑惑,不清楚应当怎样挑选自动式圆钢切断机.销售市场上所市场销售的自动式圆钢切断机品质有所不同,在选择圆钢切断机的那时候,要留意以下内容:


At present, there are many products of automatic round steel cutters on the market, because there are many manufacturers of automatic round steel cutters in China. Most customers often have doubts about how to choose automatic round steel cutters. The quality of automatic round steel cutters sold on the market is different. At the time of choosing round steel cutters, Attention should be paid to the following:




1.查询自动式圆钢切断机外壳电焊焊接是不是坚固,外型是不是干净整洁,边沿是不是有毛边、表层是不是整平. 2.查询自动式圆钢切断机主、普攻轴设备与声卡机架联接是不是坚固、旋转灵不灵便;刹车踏板设备姿势是不是灵便.自动式弹簧钢切断机


1. Query whether the shell of automatic round steel cutting machine is soldered, its appearance is clean and tidy, whether the edge is furred and the surface is flat. 2. Query whether the connection between the main part of automatic round steel cutting machine, the general tapping shaft equipment and the sound card frame is firm and inconvenient to rotate; Whether the position of brake pedal equipment is convenient. Automatic spring steel cutting machine




3.查验滚刀有没有裂缝,安裝是不是恰当,刀头固定不动地脚螺栓是不是坚固. 4.查询导轮设备与导轨滑块安裝部位、相互配合空隙是不是合乎装配图规定. 5.查验皮带盘和传动系统转动位置的安全装置是不是齐备、牢固.


3. Check whether the hob has cracks, whether the installation is appropriate, whether the knife head is fixed and the foot bolt is firm. 4. Check whether the installation position and the mating gap between the guide wheel equipment and the slider of the guide rail conform to the assembly drawing. 5. Check whether the safety device of the belt tray and the rotating position of the transmission system is complete and firm.




6.查询普攻轴部件在工作中全过程中伸缩式是不是稳定、有没有噪音. 7.查询主动轴皮带盘与主电动机皮带盘安裝部位是不是合乎工程图纸规定,三角皮带型号规格、力矩力是不是符合规定规定.


6. Query whether the retractable type of shaft parts is stable and noisy in the whole process of work. 7. Query whether the installation parts of the driving shaft belt tray and the main motor belt tray conform to the requirements of Engineering drawings, and whether the type specifications of the triangular belt and the moment force conform to the requirements.




8.查询自动式圆钢切断机各位置安裝是不是合乎工程图纸规定,及其各种各样安全标示是不是齐备,是不是固定不动在了显眼的部位.


8. Inquire whether the installation of automatic round steel cutter conforms to the requirements of Engineering drawings, and whether all kinds of safety signs are complete and fixed in the conspicuous position.http://www.luqinjixie.com/