In recent years, the full-automatic round steel cutter has been widely used in machining and small-scale rolling mill. It has played an important role in various fields of national economic construction and brought great convenience to people's life. But in the use of the full-automatic round steel cutter, there will be wear phenomenon. What are the causes of this phenomenon? The following is a brief introduction.
First, the cause of the wear of the full-automatic round steel cutting machine is that the protection work is not done in place, so that the oil spills from the bent hoop parts, which has a huge impact on the original operation environment, resulting in the aggravation of the wear in operation. In addition, the operation frequency of the parts is constantly increasing, and the operation failure occurs under the influence of various factors.
II. The operator of the equipment does not know the load of the mechanical equipment, which may cause the full-automatic round steel cutter to be damaged due to excessive load in use.
3. The load of the automatic round steel cutter must be accelerated evenly to make the machine change under a relatively stable load.
4. In practical application, there are many people who do not know the operation procedure and mechanical performance of the machine, and they may misoperate in use, resulting in the damage of the machine.
The above points are the main reasons for the automatic round steel cutter. When you use the automatic round steel cutter, you must pay attention to avoid unnecessary losses. In addition, if you have any problems, you can contact us at any time, and we will serve you wholeheartedly! Http://www.luqinjixie.com/